ERR-71018 ( 462872) Failed to invoke a system function, read() or Failed to invoke the read() system function#
Overview#
When connecting to the DB using the TCP connection type, when the DB client program does not close the DB connection (session close) normally, related error messages are recorded in altibase_boot.log.
This document describes the type and cause of the message.
Type of error message#
Error messages are recorded in all versions of Altibase, and error messages vary slightly depending on the Altibase version.
Altibase 4 ~ Altibase 5.3.3#
ERR-71018(errno=238) Failed to invoke a system function, read()
ERR-71019(errno=104) Failed to invoke a system function, write()
Altibase 5.5.1 ~ later version#
ERR-71018(errno=238) Failed to invoke the read() system function
ERR-71019(errno=104) Failed to invoke the write() system function
Explanation of error messages#
The Altibase server has a 'session manager thread' that monitors the connection between the client and the Altibase server.
In general, when a client process terminates abnormally, the session connected with that client can immediately detect its status.
However, when the work inside the Altibase server, which is not related to the session work, is being performed for a long time, the session cannot check the connection status between the client and the Altibase server. So, a 'session management thread' is placed to periodically monitor the connection status of the session.
ERR-71018(errno=113) Failed to invoke a system function, read()
ERR-71019(errno=104) Failed to invoke a system function, write()
The above error codes (ERR-71018,71019) are messages indicating that this thread has detected that the connection with the client has been disconnected and that the session has been cleaned up.
Error code ERR-71018 means it's waiting for the client's request,
Error code ERR-71019 means that it has detected that the connection has been lost while responding to the client.
Cause#
The cause of the disconnection can be inferred through the system error code errno.
ERR-71018(errno=113) Failed to invoke a system function, read()
ERR-71019(errno=104) Failed to invoke a system function, write()
Among the above error messages, errno=113 and errno=104 represent system error codes.
Major error code#
The mainly occurring errors are as follows.
-
ECONNRESET
This error code sets ECONNRESET to errno when the Altibase server receives an RST packet from the client.
The RST packet is when the client announces that the connection is no longer valid.OS System error code Linux 104 AIX 73 HP-UX 232 SUN 131 Windows 10054 - ETIMEDOUT In TCP communication, if there is no response to the session, the OS tries to retransmit the packet several times to check the connection status.
If there is no response during the set time, ETIMEDOUT occurs.OS System error code Linux 110 AIX 78 HP-UX 238 SUN 145 Windows 10060 To check system error code
Icon
For Linux, error codes are defined in the /usr/include/asm-x86_64/errno.h file.
In the case of AIX, error codes are defined in the /usr/include/errno.h file.
If there is a header file (errno.h) defined for the error code in other OS, the meaning of the error code can be checked by referring to the file.
Major occurrence case#
This can often occur in situations where the TCP session connected between the DB client and the DB server is forcibly terminated.
- L4, when idle TCP session is forcibly organized by firewall
- LAN card, mechanical error of other network equipment
- Abnormal termination or restart of DB client program
Solution#
There is no action that the Altibase server can take as a message indicating that the Altibase server has detected that the connection to the client has been lost and has cleaned up the session.
Reference#
In a replication environment, the same error message may occur in altibase_rp.log.
This occurs when the replication sender detects that the receiver is shutting down during replication log transmission.